Whiteline Suspension Sway Bar Upgrade on the 2013 Hyundai Genesis 2.0T Coupe

he factory suspension from the Hyundai Genesis coupe R-Spec gives the coupe some performance DNA but the aftermarket really helps convert this coupe into a street monster/track warrior. The Genesis coupe sway bars are the same part numbers for the 2013 since the car came to market in 2009. Whiteline Suspension offers two options and we selected the less aggressive setup.

 Our front sway bar is part number (BHF89Z) and the rear sway bar is part number (BHR88Z) putting us one step in right the direction for a perfect suspension setup. This sway bar for the Genesis coupe allows its rate to be altered by increasing or reducing the length of the lever arms. This permits the roll stiffness to be tuned for different situations without replacing the entire bar.

With the mounts provided by Whiteline this 27mm front sway bar is a breeze to install and with some adequate tools and a way safely under your car this project can be done in less than one hour. Above you can see the Whiteline product sitting snug with no clearance issues in the front of our Genesis coupe.

Here is a look at the rear sway bar which is a two way adjustable 24mm bar and are another quick installation. You can see we probably applied some grease to the bushing and just need to secure it in place with these two bolts.

Now the front sway bar is completely installed and we are prepared to test out our 27mm/24mm sway bar combination on the streets with our Genesis coupe. The fitment was nearly OEM spec putting it a step ahead of the other aftermarket options.